Wizards

Setup wizards for calibrating and profiling your Mixmate system. To reach them, tap the Manual Mode tab on the bottom navigation bar, select your machine, then switch to the Wizards tab.

Carrier Calibration WizardA simple, guided way to adjust the calibration factor on a Carrier input, without going into Configuration.

Profile Main Pump WizardThe Profile Main Pump wizard analyzes the actual performance and flow capabilities of your carrier pump and plumbing.

Calibrate Scale WizardHow to recalibrate the inductor scale using the Calibrate Scale wizard, or manually if you need to fine-tune the factor yourself.

Set Scale Empty Weight WizardThe Set Scale Empty Weight wizard identifies the point where your inductor is physically empty and sets a safety offset to prevent airlocks and foaming.