Skip to content
Mixmate Knowledge Base

Single Assembly

Configures Flow Single hardware — a single plumbing input on its own flowmeter, as opposed to the multiple inputs sharing one flowmeter on a Stack Stand.

  • Name*: Unlike other assembly types, Name is required here because this is the Plumbing Input Name.

  • Measurement: Choose Flowmeter (Gear or Mag) or Mass Flowmeter, then enter where it's Wired To (its module and port) and scan or enter its Flowmeter Code (see Valve and Flowmeter Fields).

  • Throttle Valve: The control valve for this input: choose its Valve Type, then enter its Valve Information (QR Code) (CAN bus) or Wired To and Serial Number (Digital).