Skip to content
Mixmate Knowledge Base

Component Troubleshooting

Diagnostic pathways for the valves and meters used across the Mixmate hardware family.

ARAG CAN-Bus ValveEverything for the ARAG 853 Series CAN-Bus Valve in one place: wiring and specs, maintenance, and troubleshooting by blink code.
ARAG Digital ValveEverything for the ARAG 853 Digital Valve in one place: wiring and specs, maintenance, and troubleshooting.
ARAG Mag MeterEverything for the ARAG Orion mag meter line in one place: wiring and specs, maintenance, and troubleshooting.
Flomec Gear MetersDiagnosing a gear meter that won't count or is miscounting — dried product, misaligned rotors, broken parts, air leaks — plus the full disassembly and reassembly procedure.
Mass FlowmetersMass flowmeters rarely have problems — the most common cause of a bad reading is a trapped air bubble. Beyond basic checks, they typically require a technician from the installed brand's manufacturer.
Mechanical MetersDiagnosing a mechanical meter — paddle, turbine, or similar — that reads inaccurately due to a sticky mechanism, plus cleaning, paddle replacement, and calibration.
Proximity SensorsHow to replace and wire an inductor's proximity sensors — the jug rinse sensor and the Pro Lid Sensor — when one is activating on its own or failing to trigger.