Power Module Blink Code - 1 Blink
A 1-Blink Error on the Power Module is a critical hardware alert indicating that the system has experienced a severe power drop, causing it to shut down to protect the electronics.
What does this mean?
Section titled “What does this mean?”If you see the LED on the Power Module blinking once every 5 seconds, the machine has detected that the voltage dropped below approximately 11 volts.
At this level, the machine cannot function properly. Unlike Tablet Error 104 (which is a warning), a 1-Blink Error is a hard stop. You must reboot the Mixmate machine to clear this error after the power issue has been addressed.
Power Module just clicks, no LED at all? If you try to reboot and the Power Module only clicks with no blinking light whatsoever, that's not a separate problem — it's the same power drop, just severe enough that there isn't even enough voltage available for the board to start its boot-up sequence and display the 1-Blink pattern. Work through the same steps below, starting with the battery.
How do I fix this?
Section titled “How do I fix this?”Work through the full Power Check procedure, starting with charging and evaluating the battery.