Skip to content
Mixmate Knowledge Base

Flow Type

Used primarily for configuring single product input lines.

  • Name: The Plumbing Input Name.

  • Measurement: Choose the measurement device for this input — Flowmeter (Gear or Mag), Mass Flowmeter, or Scale. Each has its own configuration, covered in its own article below.

Throttle Valve (Optional): Choose its Valve Type, CAN bus or Digital, then enter its Valve Information (QR Code) or Wired To and Serial Number (see Valve and Flowmeter Fields). Once a type is chosen, a Hose Dimensions link appears for "Charge Line" calculations.

Flowmeter (Gear or Mag)Wired To (module and port) and Scan Flowmeter Code.
Mass FlowmeterWired To (module), plus Volume and Weight Calibration Port/Factor.
ScaleAdditional Scale Head, Inductor Module, Calibration Factor, and scale sizing fields.